Peninsula Timber Gates

Home
Australia
Somerville, VIC
Peninsula Timber Gates

Timber Gates, Automation, Post & Rail Morticed Fencing. Supplied and installed.

23/10/2026

A little different from the driveway gates we usually do!

We worked with a fabulous client to design this custom pedestrian gate and matching fencing either side of their new home, the finishing touch to add some extra security.

Finished in a stunning blue-black to tie in with the home's front door, and with the pedestrian gate coming in at approx. 1.1m wide, there's plenty of room for easy access to the backyard.

Love bringing a clients' vision to life!

01/09/2026

NEW INSTALL ALERT!

Coming in at 5m wide and around 2m tall at the outside stiles, this Dorset Slider is one of the largest gates we’ve made to date!

Made from Blackbutt and featuring bolted joins, an inset slider rail and, due to the slight incline, this beast is powered by the SOMMER RUNner+.

25/08/2026

20/08/2026

We get asked this quite often... “How do you get the curve in the top rail of some of your gate designs?”

The answer is pretty simple… we cut the curve out of a wider piece of timber.

Sounds straightforward, and most of the time it is! We have over time created templates to get the curve just right, but the shallowness of the curve is limited by how wide we can source the timber and, of course, how large the gate is.

We’re currently working on this larger than usual sliding gate, so we’ve had to go a little old school to get the curve just right.

Stay tuned to see how it turns out!

10/08/2026

Traditionally, our focus has been on using natural timber, so this project was a bit of a new one for us.

This double swing gate with matching pedestrian gate is made using DecoBatten in Coastal Spotted Gum, a two-piece, timber-look aluminium batten system. With concealed fixings, it gives a clean, seamless batten look while still keeping that timber appearance.

For this project, we also automated the gate with the powerful FAAC 390 double operator kit, which is a great option for these large, angled pillars.

Another project that pushed us outside our usual timber builds, and we’re really happy with how it turned out!

12/07/2026

FOR SALE – Ready to Go!

All of our gates are handmade to order, ensuring the perfect fit for every entrance. Every now and then, plans change, and in this case we decided to complete the gate, which is now available for sale.

This beautiful double swing gate features a Blackbutt frame with traditional mortice and tenon joinery, cedar VJ panelling, adjustable hinges, and a clear coat of CUTEK Extreme CD50.

Designed to suit:
• Opening width: 3570mm (would fit up to a 3.6m opening)
• Gate height: 1745mm (would suit 1800mm high posts/fence)

If you're interested or would like to arrange a viewing, contact Pip at [email protected].

Please note: The photos shown are of the same gate design and construction, but not the actual gate that is available for sale.

10/06/2026

It's glue-up day!
Another mortice and tenon double swing gate coming together in the workshop this week. These traditional joinery methods take a little longer, but the finished result is well worth it. This one will be heading to SA in the next couple of weeks.

26/05/2026

We’re officially into the time of year where installs happen in between rain showers 🌧️😅
This beautiful project in Flinders features the Stoborough Double made from Blackbutt with bolted joins, finished off with the FAAC 392 Double Kit automation and framed with morticed post and rail fencing. A great addition to an already beautiful home!

05/05/2026

This week had us in Red Hill South installing another custom timber double swing gate. Built from Spotted Gum with blind double mortice and tenon joins, galvanised hardware, finished in a coat of CUTEK Extreme CD50 and automated with the FAAC 392.

01/05/2026

This week we’ve been building a custom gate with traditional mortice and tenon joins.

On this one we went with a blind double mortice for a cleaner finish around the rails—stay tuned to see the finished product!

Mortice and tenon gates do cost a bit more, simply because there’s a lot more time involved in doing the joins properly. We also don’t laminate our stiles (vertical end pieces), so the oversized timber has to be specially machined by the mill for us.

It takes longer and costs more, but the finished product is worth it for traditional craftsmanship.

Address

Somerville, VIC

Website

http://www.peninsulatimbergates.com.au/

Alerts

Be the first to know and let us send you an email when Peninsula Timber Gates posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.