Artisan Equine Australia

Home
Australia
Keysborough, VIC
Artisan Equine Australia

Custom-built horse walkers and treadmills. Designed for racehorses, thoroughbreds, rehab and daily horse exercise. Trusted by horse trainers across the country.

Australian-made, fully tailored to your setup, and backed with real after-sales support. Artisan Equine specialises in the fabrication and maintenance of high-quality equine training equipment like horse treadmills, walkers, crushes, and supporting products like stable mats. All of our products are manufactured in Australia in our Keysborough based factory. We have been supporting our customer acr

oss Australia, both for their Artisan Equine equipment and any other brand of horse training machines such as HorseGym and Magnum Equine.

08/06/2026

Routine service wrapped up at Leneva Park.

This Artisan Equine treadmill gets plenty of work, and it's performing really well. We went through the usual checks, inspected the belt, rollers, and bearings, and made sure everything is running clean and tight.

When you're working a treadmill hard day in and day out, regular servicing keeps it reliable and catches anything before it becomes a problem. The maintenance pays off in the long run.

This one's back in action and ready for more work.

Need a service or belt replacement on any brand of treadmill? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

06/06/2026

Electronical diagnosis and reprogramming wrapped up on this HorseGym treadmill.

We were called out to diagnose this HorseGym treadmill that was not running. We ascertained that someone with electrical knowledge decided to get into the parameter programming section in the Variable Speed Drive inverter (VSD) and change things to address a completely separate issue.

The VSD is basically the brains that controls the operation of the motor. After a few hours of diagnosis working out what had been changed and then reprogramming the affected parameters, it's back up and running like it should.

Here's the thing: VSD’s and treadmill electronics are hugely complex. There are around 1000 different parameters with multiple combinations which can be altered. And changing just one without understanding the others can shut the whole machine down, as was the case here.

Even if you're qualified as an electrician, we don’t recommend changing parameters. If something's not right with your HorseGym, give us a call. We'll sort it out properly.

03/06/2026

Premium treadmill loaded and on its way across the Nullarbor to Upper Swan in WA.

This one's heading to Isaac Pieris, and the truck left yesterday. Installation is happening this week — we'll be making the trip over to get it commissioned and running.

Isaac wanted the Premium model, so he's getting the funnel type barriers, integrated fan within the gate, touch screen controls, and optional rear wall barriers. It's a solid setup for keeping horses fit and sound out in Western Australia.

Looking forward to getting this one up and running.

Want to talk through a treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

01/06/2026

First service wrapped up for Danny Williams in Goulburn.

This Artisan Equine treadmill has been in work for a while now, and it's performing exactly as it should. We went through the usual checks, made sure everything was running well, and gave it a thorough going-over.

Regular servicing keeps these machines running smoothly and catches anything before it becomes a problem. The belt, rollers, bearings, and drive components all get inspected, and if something needs attention, we can usually sort it out on the spot.

Need a service or belt replacement on any brand of treadmill? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

29/05/2026

Service run wrapped up at Bjorn Baker's in Warwick Farm.

Bjorn runs three Magnum walkers, and we get out every six months or so to keep them safe and reliable. This visit covered the usual maintenance plus a bit of in-situ welding work to sort out some wear and tear.

Halfway through the job, a storm rolled in and it was bucketing down. Lucky there was a bit of shelter to work under, or it would have been a long afternoon.

These mono-rail style walkers are solid machines. They're simple, efficient, and built to handle daily work without fuss. We build them here in Australia, from 4-horse units all the way up to 20-horse setups. In fact, we're the only ones in Australia building mono-rail walkers.

Need a service or maintenance on your walkers? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

25/05/2026

Service run through NSW wrapped up, and the drive from Dubbo to Sydney didn't disappoint.

Stopped at Capertee Valley along the way. At 30 kilometres wide, it's supposedly the world's second largest canyon, wider than the Grand Canyon but not quite as deep. The lookout sits at 907 metres, with views stretching across the valley floor 627 metres below.

When you're covering ground between service jobs, it's worth pulling over for a view like this. Beats staring at the highway the whole way.

Back to work now, but it's good to get out and see the country while we're at it.

Need a service or belt replacement? Give us a call on 0431 437 127 or shoot us a message.

20/04/2026

Just listed: 1999 Classic Treadmill, one owner from new, never moved since delivery.

This is a full galloping treadmill built to the wider specifications with a hot-dip galvanised frame instead of the standard green paint. The frame looks clean, modern, and won't rust.

It's lived its entire life inside a shed, protected from the elements. Used maybe 12 times per week for hobby purposes only, so it's had a very limited and unstressed life. Still set up and operational.

We've listed this treadmill on consignment and will be happy to pass on interested purchasers to our customer. All enquiries should be directed to Artisan Equine first.

Price: $29,000 + GST
Location: Brisbane, QLD

Want to know more? Give us a call on 0431 437 127 or shoot us a message.

14/04/2026

Premium treadmill install wrapped up in Perth for Glenn Webster.
Getting this one into position was a tight squeeze. We had less than 10 millimetres to spare, so we pulled the front ramp off and carefully manoeuvred it through with the all-terrain forklift. The biggest challenge was working around the Perth sand without getting bogged, but with a bit of patience and replanning, we got it into the shed and commissioned.
Glenn and his daughter, train their own horses, and now they've got a treadmill to keep them fit and sound.
It's always good to meet the people behind the orders and see the setups come together. Glenn and Jody are amazing people, and it was a privilege to get this machine running for them.
Want to talk through a treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.
Made by hand. Built to last. Backed for life.

10/04/2026

Maxim Van Lierde sent through this video after Cameron wrapped up a service on their Premium Plus treadmill in New Zealand.
It's always good to hear from trainers who are putting our treadmills through their paces day in and day out. These machines are built to handle the work, and it's feedback like this that reminds us why we do what we do.
Thanks for taking the time, Maxim. We appreciate it.
Want to talk through a treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.
Made by hand. Built to last. Backed for life.

08/04/2026

Watching a horse step onto a new treadmill for the first time never gets old.
This is Glenn Webster's Premium Treadmill in Perth, and one of his horses is getting comfortable with it. You can see how the funnel type barriers guide the horse straight on without hesitation.
Glenn and his daughter, who's also horse trainer, train their own horses. This treadmill gives them a reliable way to keep their team fit and sound, no matter the weather or track conditions.
It's always good to see a machine go from the workshop to work.
Want to talk through a treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.
Made by hand. Built to last. Backed for life.

Address

33 Atlantic Drive
Keysborough, VIC
3173

Telephone

+61431437127

Website

http://www.artisanequine.com.au/

Alerts

Be the first to know and let us send you an email when Artisan Equine Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Pet Store/pet Service in Keysborough?