Weepa Products

25/08/2025

🚨News flash! - Constructing homes with brick leads to significant energy savings and a more comfortable living environment. Perfect for our Australian climate! 🚨 Thanks Midland Brick!

The new 7-star rating standard under the National Construction Code (NCC) can seem complex, but don’t worry we’re here to help.

Our latest blog breaks it all down step by step, so you can get up to speed with what it means for your build.

https://www.midlandbrick.com.au/achieving-7-stars-for-energy-efficiency

18/08/2025

🧱 𝗖𝗮𝗻 𝗬𝗼𝘂 𝗧𝗲𝗹𝗹 𝘁𝗵𝗲 𝗗𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝗰𝗲?

Not all weep holes pass certification, 𝘀𝗼 𝘄𝗲'𝗿𝗲 𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝘆𝗼𝘂𝗿 𝗲𝘆𝗲 𝗳𝗼𝗿 𝗱𝗲𝘁𝗮𝗶𝗹 𝘁𝗼 𝘁𝗵𝗲 𝘁𝗲𝘀𝘁! 👀

𝗦𝘄𝗶𝗽𝗲 𝘁𝗼 𝗰𝗼𝗺𝗽𝗮𝗿𝗲 𝗮𝗻𝗱 𝗳𝗶𝗻𝗱 𝘁𝗵𝗲 𝗮𝗻𝘀𝘄𝗲𝗿!
✅ Correctly installed Weepas (Compliant)
❌ Incorrect or poor weep hole practices (Non-compliant)

Incorrect 𝗽𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁, 𝘀𝗶𝘇𝗶𝗻𝗴 𝗼𝗿 𝗹𝗮𝗰𝗸 𝗼𝗳 𝗽𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝗼𝗻 can breach compliance and compromise the cavity wall's performance leading to moisture retention inducing mould, rot and pest ingress.

Let us know in the comments below how you go! 👍

08/08/2025

We get it. Certifiers are under mounting pressure - navigating complex standards, managing risk and ensuring compliance.

👉 𝗨𝗻𝗱𝗲𝗿𝘀𝘁𝗮𝗻𝗱 𝗕𝗔𝗟 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲:
Explore how our solutions simplify the process and support confident certification in bushfire-prone areas.

𝗪𝗲𝗲𝗽𝗮 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝘀 𝗮𝗿𝗲 𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝘁𝗼 𝗰𝗼𝗺𝗽𝗹𝘆 𝘄𝗶𝘁𝗵:

✔️ National Construction Code (NCC) 2022
✔️ Australian Standards AS3959:2018 (for construction in bushfire-prone areas)
✔️ AS1530.8.1:2018 and AS1530.8.2:2018 (Fire Testing Standards)

Weepa has a product to comply with every Bushfire Attack level in Australia.

Read on here: 📎 https://weepa.com.au/knowledge-centre/bushfire-compliance/ 👈

Detailed bushfire compliance information for Weepholes. NCC:2019 Australian Building Code. Australian Standard AS3959:2018 BAL-A12.5, BAL-A19, BAL-A29, BAL-40 and BAL-FZ. AS1530.8.1:2018

28/07/2025

Weepa Products partners with 𝗡𝗔𝗧𝗦𝗣𝗘𝗖 to ensure industry professionals have access to accurate, up-to-date information to meet increasingly complex compliance requirements. These documents not only support informed product specification and weep hole compliance but also help 𝘀𝗮𝗳𝗲𝗴𝘂𝗮𝗿𝗱 𝘆𝗼𝘂𝗿 𝘄𝗼𝗿𝗸 𝗮𝗻𝗱 𝗺𝗶𝗻𝗶𝗺𝗶𝘀𝗲 𝗿𝗶𝘀𝗸.📋

We recommend consulting the following 𝗡𝗔𝗧𝗦𝗣𝗘𝗖 documents available on our website 👉 https://www.weepa.com.au/resource-centre/natspec/

The Weepa range is subject to Intellectual Property Rights. Aust Pat Nos 2007237177, 2007215369, 2008271915, 2013211506, 2018902177. Aust Pat Ap 2019900971. International PCT AU2019/050629, PCT AU2020/050270. NZ Pat Nos 567674, 716834. Sth African Pat No 2008/03841. US Pat Nos 8171677, 9903108. C...

20/07/2025

𝗜𝗳 𝘆𝗼𝘂'𝗿𝗲 𝗻𝗼𝘁 𝘀𝘂𝗿𝗲 𝘄𝗵𝗶𝗰𝗵 𝗽𝗿𝗼𝗱𝘂𝗰𝘁 𝘁𝗼 𝘀𝗽𝗲𝗰𝗶𝗳𝘆, 𝗪𝗲𝗲𝗽𝗮 𝗺𝗮𝗸𝗲𝘀 𝗶𝘁 𝘀𝗶𝗺𝗽𝗹𝗲!
Our Product Selector Tool is designed to help industry professionals navigate choices with ease - especially when there are plenty of boxes to tick.
📌 Quick
📌 Clear
📌 Compliant


Find it on our website here: https://www.weepa.com.au/products/product-selector-tool/

The Weepa range is subject to Intellectual Property Rights. Aust Pat Nos 2007237177, 2007215369, 2008271915, 2013211506, 2018902177. Aust Pat Ap 2019900971. International PCT AU2019/050629, PCT AU2020/050270. NZ Pat Nos 567674, 716834. Sth African Pat No 2008/03841. US Pat Nos 8171677, 9903108. C...

08/07/2025

Our trusted marketing team (+1) braved the brisk Brisbane air for an early morning ride around the river. We pedalled through the chill, took in the beautiful views of our city and finished up with a delicious breakfast Brown Cafe.

Fresh air, good company, and warm coffee - the perfect start to our work day! ☕🌞

06/07/2025

𝗦𝗽𝗲𝗰𝗶𝗳𝘆 𝗪𝗲𝗲𝗽𝗮𝘀 𝗘𝗮𝗿𝗹𝘆.
𝗕𝘂𝗶𝗹𝗱 𝗕𝗲𝘁𝘁𝗲𝗿 𝗙𝗿𝗼𝗺 𝘁𝗵𝗲 𝗦𝘁𝗮𝗿𝘁.
✅ Our range covers BAL compliance across all levels: LOW to BAL-FZ 🔥
✅ Forms a clean, professional finish
✅ Tested and certified by BRANZ
✅ Cost effective, saving you time and money
✅ Pest protection from the start
✅ Fits face brick, Roman brick, block and panel work
✅ Perfect, clean weep holes every time 👌

Weep holes are essential in the construction of cavity brick buildings to ensure adequate ventilation and drainage. But they can also allow pests easy entry into homes and they are a proven entry point for embers during bushfire.

04/07/2025

🚗 𝗙𝗿𝗼𝗺 𝗣𝗲𝗿𝘁𝗵 𝘁𝗼 𝗗𝗮𝗿𝘄𝗶𝗻 𝗶𝗻 𝗮 𝗦𝗵𝗶𝘁𝗯𝗼𝘅 – 𝗔𝗹𝗹 𝗳𝗼𝗿 𝗮 𝗚𝗿𝗲𝗮𝘁 𝗖𝗮𝘂𝘀𝗲! 🌞

Weepa was proud to sponsor Peter and Dan in the Winter 2025 Sh*tbox Rally - a one-of-a-kind charity event where participants drive cars worth less than $1,500 across some of the most remote and rugged parts of Australia. This Winter's route? 𝗣𝗲𝗿𝘁𝗵 𝘁𝗼 𝗗𝗮𝗿𝘄𝗶𝗻!

The Sh*tbox Rally isn't just about the adventure (though there's plenty of that) - it's about raising much-needed funds for the 𝗖𝗮𝗻𝗰𝗲𝗿 𝗖𝗼𝘂𝗻𝗰𝗶𝗹. Along the way, Peter and Dan tackled dirt roads and the wild beauty of the outback, all with grit, humour and purpose.

We're incredibly proud of their efforts and the funds they raised for cancer research. What a journey - what a cause. 👏💛

16/06/2025

𝐓𝐫𝐮𝐬𝐭𝐞𝐝 𝐛𝐲 𝐀𝐫𝐜𝐡𝐢𝐭𝐞𝐜𝐭𝐬. 𝐁𝐚𝐜𝐤𝐞𝐝 𝐛𝐲 𝐆𝐞𝐧𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐬 𝐨𝐟 𝐄𝐱𝐩𝐞𝐫𝐢𝐞𝐧𝐜𝐞.
For over 30 years, our family-owned bushiness has supplied weep hole formers to projects across Australia - from family homes to architectural icons. Built and tested to meet Australian Standards, our products are trusted by bricklayers and designed to fit seamlessly into your plans. 📋

In our first Case Study, we revisit the Chau Chak Wing Building at the University of Technology Sydney - a striking example of collaboration across the entire supply chain, from concept to the final brick. 🧱

Read the story behind the build: https://www.weepa.com.au/knowledge-centre/case-study-chau-chak-wing-building-university-of-technology-sydney/


Photo by Reflected Image PRoductions

09/06/2025

From concept to completion, architects and specifiers are valued decision makers ensuring every home is safe, functional and aesthetically pleasing. 🏠

Weepa's Resource Hub is committed to helping building professionals understand the compliance and design value of Weepa products while adhering to building codes and regulations. 🧐 ⭐️

Interested in learning more? Follow the link below! 🤓

05/06/2025

Weepa is a proud Product Partner of NATSPEC, helping specifiers and architects access the information they need to meet complex compliance requirements. 👬

NATSPEC's objective is to improve the construction quality and productivity of the sustainable built environment through leadership of information. 📝

Check out Weepa's helpful NATSPEC TECHnotes and Worksection here 👉
https://weepa.com.au/resource-centre/natspec/

16/04/2025

Anyone else having fun in the office over the school holidays?! We have been happy to have Mini Betsy and Mini Brandon in a bit over the past week 😁🐾